Services
Interior Painting Exterior Painting Roof Painting Waterproofing Damp Proofing Commercial Painting Epoxy Floor Coating Plaster Repairs Feature Walls Spray Painting Wood Staining Ceiling Painting Fence Painting Pool Painting Anti-Rust Coatings Wallpaper Removal School Painting Industrial Painting Factory Painting Warehouse Painting Colour Consulting Kitchen Painting Bathroom Painting Garage Painting Boundary Wall Painting Estate Painting
Areas
Sea Point Mouille Point Three Anchor Bay Bantry Bay Fresnaye Clifton Camps Bay Bakoven Tamboerskloof Gardens
More
Reviews About Contact Get a Quote →

EPOXY FLOORING
GREEN POINT

Get the best quote, fast

★★★★★5-Star Reviewed
Home › Services › Epoxy Floor Coating
Professional epoxy floor coating team applying grey epoxy to a garage floor
  • Get a quote from 5-Star reviewed Green Point epoxy floor specialists
  • Garage floors and commercial spaces - durable and easy to clean
  • Moisture-resistant coatings essential in Green Point winter damp

Why Epoxy is the Best Choice for Hard-Working Concrete Floors

  • Bare concrete looks solid but is porous. It absorbs oil, water and chemicals permanently, and in a coastal environment it draws in chlorides as well
  • Epoxy forms a genuinely bonded, non-porous surface rather than a film sitting on top, which is why it survives traffic that would destroy a floor paint
  • It is seamless, so there is nowhere for water, dirt or bacteria to sit - the reason it is standard in food handling and clinical spaces
  • In Green Point's parking basements and service areas it also blocks moisture and salt from reaching the slab and the reinforcing within it
  • It brightens dark spaces dramatically. Most basement parking here is poorly lit, and a light epoxy floor can transform usable visibility
  • Line marking, bay numbering and safety demarcation can be built into the system rather than painted on afterwards
  • Properly installed, it is measured in years of service rather than seasons

Signs Your Concrete Floor Needs an Epoxy Coating

  • Dusting - a fine powder that returns however often the floor is swept, meaning the surface is breaking down
  • Oil and fluid staining soaked into the slab rather than sitting on it
  • Existing floor paint peeling or lifting in sheets, usually a sign it was applied without proper preparation
  • Pitting, spalling or crumbling at the surface
  • Efflorescence - white crystalline deposits indicating moisture moving up through the slab
  • Faded or worn-away line marking and bay numbers in a parking area
  • Rust staining around drainage or where reinforcing is close to the surface, common in coastal basements

How We Apply Professional Epoxy Floor Coatings

  • Moisture testing first. This is the step that decides whether the job succeeds - epoxy applied over a slab with rising moisture will delaminate regardless of workmanship
  • Mechanical preparation by diamond grinding or shot blasting to open the surface. Acid etching is not adequate for a system expected to last
  • Repair of cracks, pitting and spalled areas, with any exposed reinforcing treated before patching
  • Full removal of oil and grease contamination - epoxy will not bond through it
  • Priming with a system matched to the substrate's condition and moisture content
  • Application of the epoxy build coats at the specified thickness, with anti-slip aggregate where the area demands it
  • Line marking, bay numbering and safety demarcation applied within the system
  • Proper cure time before foot traffic and, separately, before vehicle traffic - these are not the same interval and rushing the second one damages the floor

Tips for a Long-Lasting Epoxy Floor

  • Insist on moisture testing before committing. In Green Point basements below the water table this is the single most common cause of failure
  • Do not accept acid etching in place of mechanical preparation. It is quicker, cheaper and does not last
  • Specify anti-slip aggregate anywhere that gets wet - ramps, entrances and wash bays. Smooth epoxy is treacherous underfoot when wet
  • Respect the full cure before allowing vehicles on. Foot traffic is permitted far earlier than vehicles and the two get confused constantly
  • Clean with a neutral pH cleaner. Harsh solvents dull and degrade the surface over time
  • Deal with oil leaks quickly - epoxy resists them well but prolonged contact will eventually affect the surface
  • Recoat before you reach the substrate. A worn topcoat is inexpensive; a floor ground back to concrete is not

Why Choose Painters Green Point for Your Epoxy Floor

  • Moisture testing as standard rather than as an optional extra
  • Mechanical preparation by grinding or shot blasting, never acid etch as a shortcut
  • Systems specified for the actual use - parking basement, plant room, kitchen or workshop each need a different build
  • Realistic scheduling around building access, which in a Green Point block usually means working around resident parking
  • Honest advice where a slab needs structural repair before any coating is viable
  • Line marking and demarcation included in the system, not painted on top afterwards

Our Commitment - What You Always Get

  • Free on-site assessment and detailed quote
  • Full surface preparation
  • Premium quality materials only
  • Final walkthrough with client
  • Complete clean-up included
  • 100% satisfaction guaranteed

Epoxy Floor Questions

Professional epoxy floor coating service in Green Point - expert painters at work
Can epoxy be applied over existing floor paint?
Existing floor paint must be removed by grinding before new epoxy can be applied. Epoxy cannot bond to a painted surface and will delaminate. We grind back to bare concrete and then apply the full epoxy system. This is non-negotiable for a lasting result.
My garage floor has oil stains - does that matter?
Yes - oil contamination prevents epoxy adhesion and causes delamination. We treat oil-contaminated concrete with specialist degreasers and allow proper drying time before mechanical preparation. In some cases, oil-contaminated concrete needs to be ground back to fresh, uncontaminated concrete. We assess your floor and advise honestly.
Is epoxy slippery when wet?
Standard epoxy gloss is quite slippery when wet. We always recommend adding anti-slip aggregate (aluminium oxide or silicon carbide) to the topcoat for garages, workshops, and any area that may be wet. This provides excellent grip while still being easy to clean.

Epoxy Floor Coating Across Green Point

Painters Green Point installs professional epoxy floor systems in homes and businesses throughout Green Point and surrounding suburbs. From the double garages of Green Point to commercial kitchens and warehouses in the area - we bring the same professional equipment, products, and preparation standards to every project.

Transform your tired concrete floor into something spectacular. Contact Painters Green Point for a free epoxy floor assessment and quote - we make floors worth showing off.

Get a Free Quote

epoxy floor coating Green Point, garage floor epoxy Green Point, concrete floor coating, epoxy floor system Green Point, anti-slip floor coating, decorative flake floor, commercial floor coating surrounding suburbs, epoxy floor installers Green Point

NEED EPOXY FLOOR COATING?

Get a free, no-obligation quote today.

Get My Free Quote

5-Star Reviews

Powered by leaderr

A division of Painterr